Oil Separators (OS1)
The OS1 separator is designed to remove oil from the refrigeration system and return it to the compressor, resulting in shorter compressor run times, reduced energy consumption and the highest possible return on investment. Internal coalescent filter captures dirt and effluent to .3 microns. Compatible with all refrigerants except ammonia.
Specs:
| Overall Height (in.) | 7.25 |
| Outside Diameter (in.) | 2 1/4 |
| Connectors (in.) | 1/4 OSD Inlet & Outlet 1/4 OSD Oil Return |
| Weight (lbs.) | 2 |
| Oil Charge (oz.) | 3.7 |
| Max. WP (psig.) | 450 |
| Max. Temp (F) | 320 |
| Paint | Baked on dry powder coat |
Regulatory Compliance: UL and UL Canada are listed (file no. SA-2359). CRN 0E2073.6C (Canada)
Protect Your Wine Cellar Refrigeration System Against Violent Boiling in the Compressor
OS1 can efficiently remove oils, grease and hydrocarbons, leaving only the non-hazardous water.
It is installed on the compressor discharge line before the condenser.
It is 7.25 inches tall and has an outside diameter of 2 1.4 inches with the following connectors: ¼ inches OSD Inlet & Outlet and 1/4 inches OSD Oil Return.
It is painted and baked on a dry powder coat with a maximum temperature of 450 °F.
To ensure the safety of your air compressor, this heavy-duty oil separator from US Cellar Systems is a must-have.
You may download the pdf file for OS1 below:
Oil Separator (OS2)
900 Series coalescent oil separators are for OE applications and require a clean system. 900 Series separators have a factory-installed standard filter that picks up all dirt and particles to 0.3 microns. Typical filters catch only 50 microns or larger.
Specs as per Diagram:
| Max Working Press. (PSI) | 650 |
| Oil Conn. Size (mm) | 6.35 |
| A Dim. (mm) | 12.70 |
| B Dim. (mm) | 213 |
| C Dim. (mm) | 19 |
| D Dim. (mm) | 102 |
| Oil Charge Amt. (ml) | 445 |
Keep Your Cooling Units Clean with the Help of OS2
This OS2 900 series is rated 650 PSI for maximum
working pressure with 445 ml of oil charge. It has an ideal size, making it convenient to install. The oil connector is 6.35 mm, A Dim – 12.70 mm, B Dim – 213 mm tall, C Dim – 19 mm And D Dim 102 mm wide.
You may download the pdf file for OS2 below: